Parting Out ST185

All Trac Parts

Parting Out ST185

Postby shogun86 » Fri Nov 04, 2016 2:34 am

I'm parting out a 91 Toyota Celica all trac. The car doesn't run because the fuel lines are completely rusted and has 170k on the clock. It has red exterior with gray leather interior. The rocker panel is rusted and it is also hit on the drive side rear 1/4 panel. The fronts seats are in bad condition.Everything else is available except for the hood, gauge cluster and rear seat belts. I kept these items for my other Celica. It may take me a little while to remove parts, since I could only do it on my days off from work. The car is located in Deer Park NY. Please message me if you have any questions or if you're interested in anything. Thanks.
All prices are negotiable.

Gen 2 3S-GTE Block (Sold)
Cylinder Head (Sold)
Wiring Harness (Sold)
ECU (Sold)
AFM (Sold)
Transmission $350
Shifter Cables $150

Driver Side Fender $40
Passenger Side Fender $75
Complete Rear Hatch $150
Driver Side Mirror $40
Passenger Side Mirror $40
Driver Door Handle $35
Passenger Door Handle $35
OEM Antenna (Sold)

Gague Cluster w/ Red Overlay Gauge Faces $120
All-trac Steering Wheel w/ Air Bag (Sold)
Climate Control $40
TRD Duracon Shift Knob (Sold)
Steering Column Plastics $50

PARTS SOLD
Driver Side A Pillar
Passenger Side A Pillar
Front Speaker Pods
Driver Side Door Molding
Center Console w/ Lid
Shifter Panel w/ Shift Boot
Radiator Over Flow Bottle
Cruise Control Actuator

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Members don't see the above ad. Register now - it's free!
Last edited by shogun86 on Thu Oct 05, 2017 9:36 pm, edited 7 times in total.
shogun86
Club Member
 
Posts: 39
Joined: Fri Feb 12, 2016 3:44 pm

Re: Parting Out ST185

Postby FC Zach » Fri Nov 04, 2016 7:24 am

If you have the press-in inserts on your door panels, I'd like to have both. Also, if you don't mind shipping larger pieces, I'd like to have the hatch carpet and left rear/ center hatch plastics if they are not in bad shape. Shipped to Eagleville, TN 37060

Image
1992 Toyota Celica AllTrac
1987 Mazda RX7 Sport
1979 Yamaha G1A, rotary powered with Sachs KM24
1976 Hercules W2000, oil injected
User avatar
FC Zach
Club Member
 
Posts: 831
Images: 9
Joined: Mon May 20, 2013 7:43 am
Location: Eagleville, TN

1992 Toyota Celica

Re: Parting Out ST185

Postby MisterKrazee » Fri Nov 04, 2016 1:17 pm

PM Sent
'88 ST165 ~ Swapped JDM '92 3S-GTE
MisterKrazee
Club Member
 
Posts: 30
Joined: Fri Jan 20, 2012 11:34 pm
Location: Greensboro, NC

Re: Parting Out ST185

Postby mx6er2587 » Fri Nov 04, 2016 2:25 pm

Pictures not working?

I need a passenger side seat belt.

Is it a system 10 car?
mx6er2587
Established Member
 
Posts: 1162
Joined: Sun Jan 27, 2008 12:08 am
Location: Pittsburgh PA

Re: Parting Out ST185

Postby FC Zach » Fri Nov 04, 2016 2:27 pm

MisterKrazee wrote:PM Sent


Inbox still empty. .
1992 Toyota Celica AllTrac
1987 Mazda RX7 Sport
1979 Yamaha G1A, rotary powered with Sachs KM24
1976 Hercules W2000, oil injected
User avatar
FC Zach
Club Member
 
Posts: 831
Images: 9
Joined: Mon May 20, 2013 7:43 am
Location: Eagleville, TN

1992 Toyota Celica

Re: Parting Out ST185

Postby shogun86 » Fri Nov 04, 2016 4:07 pm

The press-in inserts are still available. I don' t mid shipping the larger pieces. The car doesn't have a hatch carpet. I'll check the condition of the panels, but I won't be next to the car by Thursday.


FC Zach wrote:If you have the press-in inserts on your door panels, I'd like to have both. Also, if you don't mind shipping larger pieces, I'd like to have the hatch carpet and left rear/ center hatch plastics if they are not in bad shape. Shipped to Eagleville, TN 37060

Image
shogun86
Club Member
 
Posts: 39
Joined: Fri Feb 12, 2016 3:44 pm

Re: Parting Out ST185

Postby FC Zach » Fri Nov 04, 2016 4:18 pm

No hurry, let me know whenever.
1992 Toyota Celica AllTrac
1987 Mazda RX7 Sport
1979 Yamaha G1A, rotary powered with Sachs KM24
1976 Hercules W2000, oil injected
User avatar
FC Zach
Club Member
 
Posts: 831
Images: 9
Joined: Mon May 20, 2013 7:43 am
Location: Eagleville, TN

1992 Toyota Celica

Re: Parting Out ST185

Postby Nitro_Alltrac » Fri Nov 04, 2016 8:01 pm

Do you think the fuel pump bracket is any good?
Mike

92 All Trac - Daily Driver

Image
User avatar
Nitro_Alltrac
Gold Member
 
Posts: 1990
Joined: Mon Jun 26, 2006 9:13 pm
Location: Nitro, WV

Re: Parting Out ST185

Postby shogun86 » Sun Nov 06, 2016 2:39 pm

I'll check on Thursday.

Nitro_Alltrac wrote:Do you think the fuel pump bracket is any good?
shogun86
Club Member
 
Posts: 39
Joined: Fri Feb 12, 2016 3:44 pm

Re: Parting Out ST185

Postby Nitro_Alltrac » Sun Nov 06, 2016 4:56 pm

shogun86 wrote:I'll check on Thursday.

Nitro_Alltrac wrote:Do you think the fuel pump bracket is any good?


Thanks
Mike

92 All Trac - Daily Driver

Image
User avatar
Nitro_Alltrac
Gold Member
 
Posts: 1990
Joined: Mon Jun 26, 2006 9:13 pm
Location: Nitro, WV

Re: Parting Out ST185

Postby Kurt_st185_gt4 » Sun Nov 06, 2016 10:49 pm

How much for your passenger rear quarter panel? Shipping might be a pita though I'm in germany :rofl: Also interested in your driver side door light, the door switch, battery tie-down, and your a pillar tweeter housings. Shipping would be to
APO, AE 09180
Kurt_st185_gt4
Club Member
 
Posts: 74
Joined: Mon Sep 05, 2016 7:50 pm
Location: Landstuhl

1990 Toyota Celica

Re: Parting Out ST185

Postby 3SDNA » Sun Nov 06, 2016 11:05 pm

PM sent about parting the transmission stub shafts. Thanks
3SDNA
Club Member
 
Posts: 121
Joined: Mon Jun 17, 2013 3:50 pm
Location: Buckeye, AZ

Re: Parting Out ST185

Postby thedeadhp » Mon Nov 07, 2016 3:49 pm

Could I get the left rear wheel knuckle/hub assembly?
1988 Camry All-Trac 3S-FE
1998 Subaru Legacy Outback EJ25D
User avatar
thedeadhp
Newbie
 
Posts: 12
Joined: Tue Nov 04, 2014 11:50 pm
Location: Yellow Springs

Re: Parting Out ST185

Postby shogun86 » Mon Nov 07, 2016 5:38 pm

Yes i'll be will to part the stub shafts, but I don't think that i'll be able to remove them this week.

3SDNA wrote:PM sent about parting the transmission stub shafts. Thanks


Sorry I don't think that i'll be able to ship the quarter panel. I could ship all the other parts. I'll check the condition of them on Thursday.

Kurt_st185_gt4 wrote:How much for your passenger rear quarter panel? Shipping might be a pita though I'm in germany :rofl: Also interested in your driver side door light, the door switch, battery tie-down, and your a pillar tweeter housings. Shipping would be to
APO, AE 09180


Yes i'll sell the left rear wheel knuckle, but I have the keep the car rolling at the moment. I'll remove the complete rear subframe right before I junk the car.

thedeadhp wrote:Could I get the left rear wheel knuckle/hub assembly?
shogun86
Club Member
 
Posts: 39
Joined: Fri Feb 12, 2016 3:44 pm

Re: Parting Out ST185

Postby thedeadhp » Mon Nov 07, 2016 6:21 pm

Awesome! I guess I would ask for the other one as well unless someone needs it. And no rush. my car will be on hack stands for another year but I will need it haha! I'll PM you.
1988 Camry All-Trac 3S-FE
1998 Subaru Legacy Outback EJ25D
User avatar
thedeadhp
Newbie
 
Posts: 12
Joined: Tue Nov 04, 2014 11:50 pm
Location: Yellow Springs

Next

Return to Parts For Sale

Who is online

Users browsing this forum: No registered users and 2 guests