Part cleanout gen2-3 updated and parts added

All Trac Parts

Part cleanout gen2-3 updated and parts added

Postby rrain3288 » Tue Dec 13, 2016 10:41 pm

Hey guys im trying to clean out some of my old supply. and trying to make some money to fund the new engine build. some stuff was for future plans that have changed and other were spare parts that were removed everything worked when they were put into storage. but are being sold as is!

1.sold
2.sold
3. sold
4. Sold
5. KO racing T3 turbo adapter with 3in v band down pipe and rerouted dump tube ceramic coated $400.0
6. x2 catalytic converters both in good condition (1 might be for the gen3) but the bolt holes look similar. $100 per ( again heavy so shipping will be pricey)
7. sold
8. 92-93 usdm 3sgte engine harness (i think the rad temp sensor plug was damaged ) still easy fix. $250
9. sold
10. Sold
11. st185rc hood vents $135 for the rc vents (white pictured but I have red and black. I can only sell one set tho I need the other for my hoods...
12. x2 alternators 1 with duct and plug $65.0 / SOLD / and the last im not really sure where it came from ...$20
13. st185 Cruise control module worked great when removed. $125 ( hell im kinda not sure if i should sell this ...lol)
14. 90-93 rc hood x2. 1 needs some work done to it but has all the bolt on's $550 and the other is a red cs hood and is damn near mint condition might have a few small scratches but is beautiful $1000


All prices are obo and not including shipping.
Also i have a few extra coolant hoses/ brackets/body panels/ and turbo lines that are not pictured if your needing some random parts please let me know and i will see what i can dig up.
Ray.

https://goo.gl/photos/Stuyp3GFMuQ8yDTm9
Members don't see the above ad. Register now - it's free!
Last edited by rrain3288 on Tue May 23, 2017 2:06 pm, edited 7 times in total.
Why me!!!!
92 Celica Alltrac-gen 3 swap
User avatar
rrain3288
Club Member
 
Posts: 251
Images: 0
Joined: Mon Feb 23, 2009 4:51 am
Location: Tucson AZ

Re: Part clean out gen2-3 and some aftermarket!!!

Postby FC Zach » Wed Dec 14, 2016 12:01 am

"8. st185 alt snorkel $65"

I'm missing everything for cooling the alternator, is this all I need? Pics?
1992 Toyota Celica AllTrac
1987 Mazda RX7 Sport
1979 Yamaha G1A, rotary powered with Sachs KM24
1976 Hercules W2000, oil injected
User avatar
FC Zach
Club Member
 
Posts: 800
Images: 9
Joined: Mon May 20, 2013 7:43 am
Location: Eagleville, TN

1992 Toyota Celica

Re: Part clean out gen2-3 and some aftermarket!!!

Postby rrain3288 » Wed Dec 14, 2016 2:15 am

Pm'ed
Why me!!!!
92 Celica Alltrac-gen 3 swap
User avatar
rrain3288
Club Member
 
Posts: 251
Images: 0
Joined: Mon Feb 23, 2009 4:51 am
Location: Tucson AZ

Re: Part clean out gen2-3 and some aftermarket!!!

Postby awdmofo » Wed Dec 28, 2016 6:47 am

Are the stock 3gen cams much different from the 2nd gen?
1990 All-trac current money pit (being rebuilt) :roll:
2013 Camaro LS 6-sp (daily)

2005 Yamaha R6 (sold)
2001 Spider (sold)
1990 alltrac (sold)
1991 MR2 turbo x2 (Sold)
User avatar
awdmofo
Club Member
 
Posts: 123
Images: 7
Joined: Tue May 17, 2016 3:06 am

Re: Part clean out gen2-3 and some aftermarket!!!

Postby rrain3288 » Wed Dec 28, 2016 12:22 pm

If I'm correct they have 6 degrees more timing built into them and a few more points of lift
Why me!!!!
92 Celica Alltrac-gen 3 swap
User avatar
rrain3288
Club Member
 
Posts: 251
Images: 0
Joined: Mon Feb 23, 2009 4:51 am
Location: Tucson AZ

Re: Part clean out gen2-3 and some aftermarket!!!

Postby awdmofo » Wed Dec 28, 2016 6:20 pm

rrain3288 wrote:If I'm correct they have 6 degrees more timing built into them and a few more points of lift


trying to find out if its worth it with a stock 2nd gen rebuild im doing, im going with ATS adjustable cam gears as well. I'll get back to you asap. still working on getting my engine/trans out this week.
1990 All-trac current money pit (being rebuilt) :roll:
2013 Camaro LS 6-sp (daily)

2005 Yamaha R6 (sold)
2001 Spider (sold)
1990 alltrac (sold)
1991 MR2 turbo x2 (Sold)
User avatar
awdmofo
Club Member
 
Posts: 123
Images: 7
Joined: Tue May 17, 2016 3:06 am

Re: Part cleanout gen2-3 updated and parts added

Postby rrain3288 » Sun Jan 22, 2017 5:29 pm

Bump parts added
Why me!!!!
92 Celica Alltrac-gen 3 swap
User avatar
rrain3288
Club Member
 
Posts: 251
Images: 0
Joined: Mon Feb 23, 2009 4:51 am
Location: Tucson AZ

Re: Part cleanout gen2-3 updated and parts added

Postby ToyotaFanboy » Thu Apr 27, 2017 5:56 pm

Hey, can I see a pic of the trans cooler with lines?
ToyotaFanboy
Newbie
 
Posts: 9
Joined: Sat Jul 23, 2016 10:06 pm

Re: Part cleanout gen2-3 updated and parts added

Postby shadow_coupe » Sat May 13, 2017 9:43 am

I'm looking for the Gen2 intake manifold stays/supports. Aka the two metal bars on the back of the intake manifold that connect to the block. Hope there's a couple somewhere in your pile of goodies! Thanks
1990 Celica AllTrac
shadow_coupe
Club Member
 
Posts: 117
Joined: Tue Feb 12, 2008 8:23 am
Location: Beaverton, OR

1990 Toyota Celica

Re: Part cleanout gen2-3 updated and parts added

Postby celica_gtx » Sun May 21, 2017 11:35 am

You have any pics of the rc hood that needs work?
transformation has BEGUN!!!
90GT W/ 90 3SGTE/ SOLD
91 ALL-TRAC 215 w 205 swapd
87 Turbo 4runner-DD/ Expedition build
10 Scion Xb-kid hauler
celica_gtx
Club Member
 
Posts: 653
Joined: Wed Jan 25, 2006 3:37 am
Location: az

Re: Part cleanout gen2-3 updated and parts added

Postby Zith » Tue May 23, 2017 11:52 am

PM sent!
'92 All-Trac
Zith
Club Member
 
Posts: 24
Joined: Sun Sep 16, 2007 3:16 pm
Location: Green Mountain Falls, CO


Return to Parts For Sale

Who is online

Users browsing this forum: No registered users and 1 guest