Antilag BPV question

From Tune Ups to Oil Changes, maintenance related

Moderator: toayoztan

Antilag BPV question

Postby lalojamesliz1 » Sat Aug 26, 2017 12:12 am

I want to vent a mr2 bpv I have from my st205 intercooler but I have the antilag bpv in the way and it's connected to the exhaust manifold with some metal lines.
I know replacing my manifold with a regular st205 manifold is a solution but it's also a lot of work.
Has anyone removed and plugged the manifold metal lines?
http://s953.photobucket.com/user/laloja ... i.jpg.html
Members don't see the above ad. Register now - it's free!
91 Celica all-trac gen3 swap
87 toy 5speed long bed
69 mustang
08 sequoia
14 avalon
and a 2 car garage :shoots:
lalojamesliz1
Club Member
 
Posts: 159
Joined: Sun Jul 23, 2017 3:03 pm
Location: Bakersfield, CA

Re: Antilag BPV question

Postby rrain3288 » Sat Aug 26, 2017 3:58 am

Don't quote me but everything I've heard says that the anti lag piping on that manifold isn't operational and it's actually quite a bit of work to make it functional so switching to an MR2 blow off valve shouldn't be complicated at all
Why me!!!!
92 Celica Alltrac-gen 3 swap
User avatar
rrain3288
Club Member
 
Posts: 252
Images: 0
Joined: Mon Feb 23, 2009 4:51 am
Location: Tucson AZ

Re: Antilag BPV question

Postby lalojamesliz1 » Sat Aug 26, 2017 1:58 pm

I remember seeing the piping works, it's just the programming is not available. Now that I think about it, i should be able to just cap the rubber lines by the antilag valve since the exhaust manifold doesnt pressurized..... right? Lol
91 Celica all-trac gen3 swap
87 toy 5speed long bed
69 mustang
08 sequoia
14 avalon
and a 2 car garage :shoots:
lalojamesliz1
Club Member
 
Posts: 159
Joined: Sun Jul 23, 2017 3:03 pm
Location: Bakersfield, CA

Re: Antilag BPV question

Postby rrain3288 » Sat Aug 26, 2017 4:08 pm

The pipes dead end into the manifold so the manifold isn't tapped through all the way. So caping the pipes should just prevent dust and oil getting into the piping.
Why me!!!!
92 Celica Alltrac-gen 3 swap
User avatar
rrain3288
Club Member
 
Posts: 252
Images: 0
Joined: Mon Feb 23, 2009 4:51 am
Location: Tucson AZ

Re: Antilag BPV question

Postby lalojamesliz1 » Sun Aug 27, 2017 3:01 am

Well I didn't get a chance to check on that today. I had to do a brake job on my SUV and cleaned up the garage. Damn this heat. 104 today and 108+ the next few days.
I can only imagine what my neighbors across my street think when they see me using my wet/dry vac to vacuum my Garage floor lol
91 Celica all-trac gen3 swap
87 toy 5speed long bed
69 mustang
08 sequoia
14 avalon
and a 2 car garage :shoots:
lalojamesliz1
Club Member
 
Posts: 159
Joined: Sun Jul 23, 2017 3:03 pm
Location: Bakersfield, CA

Re: Antilag BPV question

Postby lalojamesliz1 » Mon Aug 28, 2017 5:02 am

Got the intercooler and antilag BPV off then started my engine (gotta love gen3 efi)
The lines that go to the antilag bpv look dirty inside but I don't know what that's from. It didn't really matter once I saw that the antilag Bpv let's the air flow right through to the connected bpv I have :D
I will just leave them both on and connect a vacumm line to my bpv to vent
91 Celica all-trac gen3 swap
87 toy 5speed long bed
69 mustang
08 sequoia
14 avalon
and a 2 car garage :shoots:
lalojamesliz1
Club Member
 
Posts: 159
Joined: Sun Jul 23, 2017 3:03 pm
Location: Bakersfield, CA


Return to General Maintenance and Repair

Who is online

Users browsing this forum: Bing [Bot] and 5 guests