Page 1 of 1

SOLD - Baller on a Budget BBK - Fits Alltrac & 1st Gen MR2

PostPosted: Mon May 18, 2020 2:31 pm
by ZeroDrift
Kit was just sold.

As the title states, I've a big brake kit that I purchased for my old ST165 that I've since sold. The kit will work on the first gen AW11 knuckles as these cars have the same spec on the caliper mounting points; however, I do not know of a rotor that will work for this car.

The kit was developed by a forum member and the original thread is located here: viewtopic.php?f=8&t=48517

In either case, the kit has been fitted to both an ST165 and my AW11 for mock up purposes, but never used. I'm selling the front calipers which have been ceramic coated gold with a coating from Cerakote. The rear calipers I'm including as I've no longer a need for them. Would complement the front calipers for a complete set, but you'd need to make a bracket for them.

I'm asking $300 for the set shipped. Shipping is included if within the US.

Re: Baller on a Budget BBK - Fits Alltrac & 1st Gen MR2 (AW1

PostPosted: Mon May 18, 2020 2:36 pm
by ZeroDrift
Few more pictures.

Re: Baller on a Budget BBK - Fits Alltrac & 1st Gen MR2 (AW1

PostPosted: Mon May 18, 2020 2:56 pm
by simple
Bummer you sold it! Did you ever get the engine back together?

Re: Baller on a Budget BBK - Fits Alltrac & 1st Gen MR2 (AW1

PostPosted: Mon May 18, 2020 4:06 pm
by ZeroDrift
simple wrote:Bummer you sold it! Did you ever get the engine back together?


Sort of - The original engine was salvaged and is partially merged together with a Gen 4 3sgte engine. The old block/head is now just a mock up block. I'm putting this engine into my Mk1 MR2 and am finally starting to make some progress on the project recently. Here is a vid of both engines and my MR2: https://www.youtube.com/watch?v=KWWbSbF ... 8cI-ij4ZWc

Re: Baller on a Budget BBK - Fits Alltrac & 1st Gen MR2 (AW1

PostPosted: Mon May 18, 2020 5:28 pm
by simple
Crazy. So you sold your ST165 shell?

Re: Baller on a Budget BBK - Fits Alltrac & 1st Gen MR2 (AW1

PostPosted: Mon May 18, 2020 5:48 pm
by Tecker185
They are ls430 caliper?


Sent from my iPhone using Tapatalk

Re: Baller on a Budget BBK - Fits Alltrac & 1st Gen MR2 (AW1

PostPosted: Mon May 18, 2020 5:52 pm
by ZeroDrift
Tecker185 wrote:They are ls430 caliper?


Sent from my iPhone using Tapatalk


Yes - This is exactly what the calipers are from. 2001 - 2006 as I recall.

Re: Baller on a Budget BBK - Fits Alltrac & 1st Gen MR2 (AW1

PostPosted: Mon May 18, 2020 5:54 pm
by ZeroDrift
simple wrote:Crazy. So you sold your ST165 shell?


Yes - sold the shell to a guy locally here in Denver. I believe he swapped in a 1MZ V6 into the car. I believe he mentioned it fits with some clearance made on the engine crankcase and transfer case.

Re: Baller on a Budget BBK - Fits Alltrac & 1st Gen MR2 (AW1

PostPosted: Tue May 19, 2020 8:59 pm
by hoys
Thanks for posting this. I bought this kit awhile ago and could never find it's origin. Now I know it won't fit my 185 that well...I guess I have one for sale too!

Re: Baller on a Budget BBK - Fits Alltrac & 1st Gen MR2 (AW1

PostPosted: Wed May 20, 2020 9:08 pm
by ZeroDrift
hoys wrote:Thanks for posting this. I bought this kit awhile ago and could never find it's origin. Now I know it won't fit my 185 that well...I guess I have one for sale too!


Glad I can help out with the backstory on this kit. My kit just sold!