[Toyota Part Numbers]

turbo4wd

Moderator
90341-18033 PLUG (FOR MANUAL TRANSMISSION FILLER)
90430-18008 GASKET (FOR MANUAL TRANSMISSION FILLER PLUG)
90430-18008 GASKET, DRAIN PLUG (MTM)
90341-18006 PLUG SUB-ASSY, DRAIN (MTM)
 

gpmarzan

New member
17882-74070 Intake Hose for the st165 (same as st185??) Its the hose that connects to the turbo.

16400-74171 st165 Radiator
 

Rick89GTS

New member
gpmarzan":31wjabrd said:
17882-74070 Intake Hose for the st165 (same as st185??) Its the hose that connects to the turbo....
Nope, 185 is a different part number; different size.

04422-20010: Oil Seal kit for front wheel bearings; ST165 & ST185 (88-93)
90916-03090: Thermostat ST165
 

d1alltrac

Active member
i need the part # for the rubber elbow that connects the metal part of the turbo oil return line to the oilpan on 165's...here's a diagram:

untitled4.jpg


hopefully someone can help
 

pepper

New member
d1alltrac":319a68i4 said:
i need the part # for the rubber elbow that connects the metal part of the turbo oil return line to the oilpan on 165's

Looks like it's "Hose, Turbo Oil Outlet", #15491-88380

-Mike
 

turbo4wd

Moderator
Cut and pasted from the other thread about ECU Part Numbers..

UK 185 ecu's-
89661-20770=89/10-91/08
89661-2b320=91/08-92/02
89661-2b300=92/02-93/11

JDM 185 ecu's-
89661-20750=89/10-90/03(superceeded to 20751)
89661-20751=90/03-91/08
89661-2b310=91/08-92/02
89661-2b280=91/08-93/09

UK 205 ecu-
89661-2b850

JDM 205 ecu
89661-2b841=94/02-95/03
 

jprine01

New member
Austen_gt4":2us01t8e said:
18X w/o abs
proportioning valve w/o abs 47150-20160 167.41
front brake no4 w/o abs 47314-20360 16.03
front brake no1 w/o abs 47311-20710 10.79
front brake no3 w/o abs 47313-20480 10.50

Man, so i bought all the non abs stuff, orderd 5 lines, proportioning valve, the 3way etc. (the line not listed above is 47315-20491 front break no.5) goes to the left wheel... Anyway I got everything in the mail but one thing "front brake no3 w/o abs 47313-20480" says Discontiuned on my invoice. !!!! noooooooo, so now i have to find one at the junkyard or get one made who knows... Common toyota keep our parts around!! :( sad day for me.
 

Stubble

Active member
Transmission related (sorry but I don't know which is which)
33369-20010 Synchro ring
33367-20040 Synchro ring
33367-20060 Synchro ring
33368-20040 Synchro ring
90365-30023 Bearing
90363-33007 Bearing
90366-28007 Bearing
90366-32002 Bearing
90364-36007 Bearing
90364-36010 Bearing
90364-39008 Bearing
90364-33004 Bearing

This will get you a complete tranny rebuild, replacing all the synchros and bearings in a E150F tranny (1990 ST185 US/CanDM)
 

Stubble

Active member
More p/n's:
45046-19175 Tie rod end
83710-20880 Speedometer cable, tranny to firewall
13540-88381 Timing belt tensioner
13505-88382 Timing belt idler pulley (not sure which one, there are 2)
90930-03148 Freeze plug set
11701-88342-0_ Main bearing (specify the size with the last digit)
11071-88570-0_ #3 Main bearing (specify the size with the last digit)
11011-25010 Main thrust washer (bearing)
04175-74030 Turbo gasket set (90-91; comes with o/h gasket set for 92-93)
99363-70760-83 Power steering belt
11122-88320 Valve guide bushings
23300-19225 Fuel filter
 

Stubble

Active member
More for a '90 ST185
43330-29326 Ball joints
90179-12065 Trailing arm nuts (can't determine front or rear) 90179-12065
19127-74040 Distributor cap o-ring
90099-14090 Distributor shaft o-ring
90311-52005 Rear wheel bearing outer oil seal
42210-14010 Spherical bearings for rear control arm outer pivots (camry part listed in EPC)
 

turbo4wd

Moderator
(Courtesy of Griffin)

These part numbers are for a 1990. They are ALL the coolant hoses (except the heater hoses) and a couple of the specialty vacuum hoses and the o-rings for the oil cooler. Enjoy!

Vacuum lines:
12261-88381
12263-74040
17342-88360 X2

Oil Cooler O-rings:
96732-19019
90301-52002
15785-35010
15517-88380

Coolant hoses:
16261-88361
16264-88383
16267-88382
16282-88380
16283-88381
16284-88381
95333-06040
85338-74130
90445-12078
16571-74130
16572-88381
16572-74110
 
Three more.
Oil filter bracket O-rings(ST165):
96732-19019
96732-31055

Crush washers for oil cooler(ST165):
15785-88380(you will need six of these)

Oil cooler O-rings(ST165):
90301-22004(you will need two of these)

Hex bolts to hold CV axle to tranny(ST165/ST185?)
90110-10015(you will need six bolts per axle; it is an 8mm hex socket if I remember correctly).
 

turbo4wd

Moderator
d1alltrac":3a13x0u2 said:
anyone know the part number for the 185 exhaust manifold? 7 or 9 bolt i dont really care, i just wanna try to get a new one before searching for a used one because i have heard they are relatively inexpensive

TIA

Exhaust system - Exhaust manifold
EXHAUST MANIFOLD, Celica, w/Turbo 1990 - 1993

17141-88381

MSRP: $242.59

(i would search for a used one or see if anyone has any spares lying around because depending on your discount with the dealer its still $150+.. )
 

SuperWhite92

New member
ST185 Radio Pieces:

LH Mounting bracket: 86211-20300
RH Mounting bracket: 86212-20290
Non-System 10 Tray insert (For use with aftermarket decks: 55521-16030
 

RIalltrac

Active member
I saw some of these posted above, but some of the numbers are different. These part numbers and prices came from Bob Bridge toyota (1st something or other.com) for a 90 st185

oil cooler seal 15785-35010 $.72
oil cooler seal 90301-52006 $2.69
oil cooler line gasket 15471-88580 $3.95
oil pump shaft seal 15165-70010 $5.78
oil pump seal 15188-63010 $9.38
 

four twenty

New member
Hehe, that's an easy one - 15301-88381.



Thanks a bunch.


Here's another easy one:

Are the OEM gas caps the same for all Toyotas?

If not then I need the part # for the ST165 gas cap.




Take care.
 

Conan

New member
jimjovan":2cof10oe said:
Can anyone tell me the part number for the ST165 dipstick or dipstick seal?
15301-88380 GAGE SUB-ASSY, OIL LEVEL

Sorry, I don't know what a dipstick seal is :shrug:
 

Conan

New member
NemesisGT-2":kcdhsmsx said:
I got 31470-12093 from the dealer and it is the WRONG part.
Hehe, it's a slave cylinder just not from an ST185 ;)

This should be the one:
31470-20210 CYLINDER ASSY, CLUTCH RELEASE
 
Top