Wiring Diagrams

I've got a Viper 300 alarm that was taken out of a newer VW Beetle, it's not a stock alarm, you can buy it at a lot of stores.. Problem is I don't have a wiring diagram for my car or the alarm, though there's a basic diagram on the brain of the alarm.

Do any of you happen to have a good diagram for a 1988 ST165, or know of any places I might find a good, detailed diagram for the Viper 300?

i got the diagrams for a viper 971 vx? I also got the install booklet for my st165 to install it. If you want that to see if it helps let me know.

That'd be great, I'd really appreciate it.

Here you go...for the alarm wires:

http://www.drdetailshop.com/deiinstallguides.htm

And, the wires for the car....

12volts white or black/red + ignition harness
Starter black/white + ignition harness
Ignition black/yellow + ignition harness
Second Ignition black/orange + ignition harness
Accessory blue/red + ignition harness
Notes: Not required for remote start.
Power Lock blue/black - either kick panel
Power Unlock blue and green - either kick panel
Notes: Use both wires and diode isolate each.
Parking Lights+ dk. green driver kick panel
Door Trigger red/white - fuse box
Trunk/Hatch Pin tied in with doors
Tachometer black AC igniter
Brake Wire green/white + drivers kick panel
Horn Trigger green - steering column

If you need the wires in Word or something, PM me your email.
Brett.

yea i had the same info for ya, beat me too it! Good luck!

Thanks a shitload, you guys kick ass.