Fri Aug 18, 2017 3:02 am
Sat Aug 19, 2017 1:19 pm
Sat Aug 19, 2017 2:31 pm
ChrisD wrote:Welcome! Where in the rockies?
To answer your question, they will definitely fit. Quite nicely I'd say. I run a 16x7 with a +33. Tires are 205-50R16. They fill out the wheel wells very nicely. The rear is flush too, and I also have an ST205 rear end which pushes things out a bit more. You can see lots of pictures in my build thread: http://www.celicatech.com/forums/showth ... 65-Gandalf
You might find with a +35 you might want a small spacer on the rear...but really, finding the perfect setup is rather difficult. I'd say, if you like the wheels, go for it. Should look good.
Sun Aug 20, 2017 12:17 pm
Sun Aug 20, 2017 2:55 pm
AlltracAvenger wrote:Welcome to the forum! I don't know if it helps too much, but I'm running 17x8 OZ Ultraleggeras which are ET35 IIRC. I get slight rubbing on the rear(nothing a minor fender roll wouldn't fix) on 215-width tires, though my car is sitting on coilovers and is a bit lower than stock. I'm not using spacers.
There are a few of us in Colorado still rocking these cars. I'm from the Springs, though there's a few folks in Denver as well.
Sun Aug 20, 2017 10:34 pm
Tue Aug 22, 2017 12:24 pm
Distant_Midnite wrote:Wow you have had the st165 since high school eh? and still got it? that's awesome mate. I currently live in a small town near Denver, Colorado. Bought the all trac from Chicago, IL with 177k Km on the clock, not to different from when you bought yours it looks! I am having it shipped to me, and it will be here next week. I am coming from an 03 WRX which I beat within an inch of its life, and I aiming to have the nostalgia of the 88 all trac to calm down my spirited driving. Thanks for reaching out about the wheel quetion. I did figure these would fit, I was hoping to not have to use spacers but we will see when i get the wheels on. I am buying some rims from the UK, a pair of Sparco Terras. I am currently waiting to hear back from the company about specifics of their center bore measurements, because they state "1 center bore" on the site which confuses me as to the actual mm, I imagine that might mean 100mm but who knows. Hoping to get some more clarity before I go and order them but I am dedicated to the idea of getting these ones. I will look forward to posting some photos.
© 2018 AllTrac.net
phpBB Mobile / SEO by Artodia.