hks timming belt

General Chat

hks timming belt

Postby alltracst185 » Fri Jun 20, 2008 4:41 pm

where can i one for a good price other than ebay?
Members don't see the above ad. Register now - it's free!
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Postby klue » Fri Jun 20, 2008 10:17 pm

contact your local dealer, I have yet to find a better timing belt than the toyota one. I have seen the greedy and hks ones in hand. They just seem like colorful aftermarket replacements.
facebook.com/xiiimotorsports
#xiiimotorsports ON instagram
User avatar
klue
GTFour God
 
Posts: 3893
Joined: Thu Nov 04, 2004 9:47 pm
Location: Greater Toronto Area

Postby alltracst185 » Fri Jun 20, 2008 11:23 pm

where else can i get a hks timing belt other than ebay?
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Postby 935motorsports » Fri Jun 20, 2008 11:54 pm

*cough*
935motorsports
Established Member
 
Posts: 1686
Joined: Fri Aug 06, 2004 3:20 pm

Postby etantshi » Sat Jun 21, 2008 2:14 am

I can't speak on quality as I have never run one, but I assume it's just a 'name dropping' item. You got any more info on these rob? What does HKS have down for their timing belt? Do they claim it's upgraded?
-----
André B.
1991 ST185 (down but not out)
1990 ST185 (lost, but not forgotten)
1996 RZN140 (the daily)
2004 Yamaha R6 (needs a battery)
etantshi
GTFour God
 
Posts: 5749
Joined: Fri Sep 03, 2004 1:05 am
Location: Augusta

Postby klue » Sat Jun 21, 2008 6:10 am

alltracst185 wrote:where else can i get a hks timing belt other than ebay?


contact 935
facebook.com/xiiimotorsports
#xiiimotorsports ON instagram
User avatar
klue
GTFour God
 
Posts: 3893
Joined: Thu Nov 04, 2004 9:47 pm
Location: Greater Toronto Area

Postby 935motorsports » Sat Jun 21, 2008 4:57 pm

Kevlar reinforced.


I'd go with Greddy though, it is much cheaper.
935motorsports
Established Member
 
Posts: 1686
Joined: Fri Aug 06, 2004 3:20 pm

Postby etantshi » Sat Jun 21, 2008 8:06 pm

935motorsports wrote:Kevlar reinforced.


I'd go with Greddy though, it is much cheaper.


It'll just throw off the color scheme for those rockin' the HKS cam gears. :P
-----
André B.
1991 ST185 (down but not out)
1990 ST185 (lost, but not forgotten)
1996 RZN140 (the daily)
2004 Yamaha R6 (needs a battery)
etantshi
GTFour God
 
Posts: 5749
Joined: Fri Sep 03, 2004 1:05 am
Location: Augusta

Postby Autobot » Sat Jun 21, 2008 9:05 pm

My thoughts exactly lol
Image

Image
User avatar
Autobot
Established Member
 
Posts: 1810
Joined: Fri Jan 28, 2005 10:53 pm
Location: Manitoba, Canada

Postby bridge47 » Mon Jun 23, 2008 4:01 am

This is 5SFE but it might help. I took the cam sprocket and held timing belt around it and wiggled spocket back and forth to check for play. Aftermarket(not HKS or greddy-didn't try them) belts always seem to have a little. Toyota ones none.
bridge47
Club Member
 
Posts: 674
Joined: Sat Feb 24, 2007 11:33 am
Location: Woodland Park, CO

Postby alltracst185 » Tue Jun 24, 2008 3:02 pm

what about gates racing belts? they look to be the ones that greddy goes through. www.gatesracing.com they make silicone hoses and serpentine belts too!
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA

Postby Michael W » Tue Jun 24, 2008 8:40 pm

Power enterprise timingbelt would be a good option too.

Can be found at horsepowerfreaks. According to Chris@hpf, it would be very strong.
Life is short, stunt it!

-92 st185 Carlos sainz
Michael W
Club Member
 
Posts: 46
Joined: Thu Dec 13, 2007 11:47 am
Location: Sweden


Return to Club Chat

Who is online

Users browsing this forum: No registered users and 1 guest

cron