Switch to full style
General Chat
Post a reply

help!!! newbie question here

Sun Aug 31, 2014 6:22 pm

OK I new to the Alltrac and was wounding if a greddy tdo6 turbo for a mr2 will bolt straight up to the stock st185 manifold and downpipe ??..thanks
Members don't see the above ad. Register now

Re: help!!! newbie question here

Sun Aug 31, 2014 9:46 pm

Depends what "for a mr2" means.

Basically any turbo will require some sort of adapter. If that adapter is included because it was on an Mr2, then yes. Otherwise, no.

It will NOT bolt up to a stock downpipe.

Re: help!!! newbie question here

Mon Sep 01, 2014 12:56 am

Ya the kit does come with a manifold adapter for the mr2, so with that it should just bolt right up to the Alltrac manifold right? so all I would need is a aftermarket downpipe right?..thanks

Re: help!!! newbie question here

Sat Sep 06, 2014 1:13 am

Yes, if you have the adapter it should bolt right up.

Greddy has a downpipe for the TD06 20g that is a stock replacement i.e. bolts to the stock exhaust. You may be able to source somewhere... but I have no idea where.

You can't just use "an aftermarket" downpipe, per say, as those have the flange for the CT26 turbo. I don't have a good pic, but here is a wrapped one for the td06: Image

GL!

Re: help!!! newbie question here

Sat Sep 06, 2014 1:14 am

Turns out ATS makes a replacement: http://www.atsracing.net/Parts/Details/EX-ATS-DP-TD06

Cheers

Re: help!!! newbie question here

Sun Sep 07, 2014 3:10 pm

Thanks!!! That answers my question
Post a reply