help!!! newbie question here

AWDtime

New member
OK I new to the Alltrac and was wounding if a greddy tdo6 turbo for a mr2 will bolt straight up to the stock st185 manifold and downpipe ??..thanks
 

WarTowels

Active member
Depends what "for a mr2" means.

Basically any turbo will require some sort of adapter. If that adapter is included because it was on an Mr2, then yes. Otherwise, no.

It will NOT bolt up to a stock downpipe.
 

AWDtime

New member
Ya the kit does come with a manifold adapter for the mr2, so with that it should just bolt right up to the Alltrac manifold right? so all I would need is a aftermarket downpipe right?..thanks
 

WarTowels

Active member
Yes, if you have the adapter it should bolt right up.

Greddy has a downpipe for the TD06 20g that is a stock replacement i.e. bolts to the stock exhaust. You may be able to source somewhere... but I have no idea where.

You can't just use "an aftermarket" downpipe, per say, as those have the flange for the CT26 turbo. I don't have a good pic, but here is a wrapped one for the td06:
1377034_10102979105655200_139187038_n_zps9c646f8d.jpg


GL!
 
Top