clutch problems

4

403-st165

New member
i went out to start my trac to go to work today and i pushed on the clutch as i always do but instead of any pressure it just prettymuch fell to the floor and stayed there i had to putt it back up and i cant see any fluids on the ground any one have any ideas what it could be?? please let me know asap thanks guys
 
C

Corey

Active member
^^ +1

It can be leaking out of:

Slave cylinder on tranny.
The joint between Clutch flex line and tranny hard line.
The joint between Clutch Flex line and Fire wall hard line.
Or where the firewall hard line threads into the Master Cylinder.
 
4

403-st165

New member
does anyone know where to find the clutch fluid cylender in an 88 alltrac i looked quick but its reslly cold outside and i cant drive it so i cant get it any where warm
 
C

Corey

Active member
Well, if its anything like an ST185, then its on the driver side, bolted to the fire wall, probably tucked just underneith the Strut Tower Brace. The clutch fluid cylinder resevoir is smaller then the Brake Fluid Cylinder resevoir.
 
4

403-st165

New member
sweet thatnks guys ill go look ne one know what kind of fluid it needs??
i know clutch fluid but u know ne spacifics??
im only getting it running to get it to the place where the engines gettting swapped
 
You must log in or register to reply here.
Top