project alltracst185 update! 6/15/14 rust is gone!!! :)

Talk about your project car here
Post a reply

Re: project alltracst185 8/23 new first start vid :)

Postby Landon » Tue Sep 27, 2011 2:16 am

dude sounds like a beast! soo good. whats the horrible racket though? i'm stoked for you to get that thing tuned.
Members don't see the above ad. Register now - it's free!
White 1995 BMW M3
Black '90 st185 Sold :(
User avatar
Landon
Established Member
 
Posts: 1092
Joined: Tue Nov 11, 2008 12:05 am
Location: Joseph, Oregon
Top

Re: project alltracst185 8/23 new first start vid :)

Postby alltracst185 » Tue Sep 27, 2011 10:21 pm

Landon wrote:dude sounds like a beast! soo good. whats the horrible racket though? i'm stoked for you to get that thing tuned.

The wastegate and downpipe were loose and down pipe flange was just tack welded for mockup. Got that all squared away now and she sounds great!!! Soooo mean :smokes: Just have to do front wheels bearings now and make some brackets.
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA
Top

Re: project alltracst185 8/23 new first start vid :)

Postby Landon » Wed Sep 28, 2011 2:21 am

goood! front wheels bearings are such a bitch.. not to do, but just in general. lol. i've had to do my pass side 4 times in the last 2 years.. finally replaced the cv as well and its golden. let me know if you need any advice on them.. unless you got it all figured.
White 1995 BMW M3
Black '90 st185 Sold :(
User avatar
Landon
Established Member
 
Posts: 1092
Joined: Tue Nov 11, 2008 12:05 am
Location: Joseph, Oregon
Top

Re: project alltracst185 8/23 new first start vid :)

Postby alltracst185 » Sat Oct 22, 2011 2:06 pm

Worked on my car for a bit after work yesterday, got some vaccum lines ran as well as the bottom intercooler pipe finshed, just need to get my new Tial BOV and weld on the flange, beed roll the intercooler pipes, finish the vaccum lines and install my AEM UEGO :D I went to go lower the car back on all fours and noticed i'm missing my jack :x I have to get a new jack now. Was going to take her for a little spin to see if i get any issues or leaks. New video coming soon! :wink:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA
Top

Re: project alltracst185 10/22 more progress :D

Postby alltracst185 » Thu Nov 03, 2011 8:14 pm

Just received my ASI aluminum radiator and new Tial BOV :D CCW classics on the way also :smokes: Ahhhh she's coming together nice! :D :D :D
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA
Top

Re: project alltracst185 10/22 more progress :D

Postby alltracst185 » Thu Nov 03, 2011 11:58 pm

Also just ordered my CS/RC hood spoiler :wink:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA
Top

Re: project alltracst185 10/22 more progress :D

Postby toayoztan » Fri Nov 04, 2011 2:25 am

The ASI is pretty decent for what you pay, I obviously haven't used mine yet but just looking at it, I like it.

I love the RC hood, I love the complexion of it with all the pieces that go on it.

Bryan
2017 Pilot Elite
2014 Juke NISMO RS
1994 Supra TT 6spd
1993 Alltrac - http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=37466
1977 Celica GT Liftback
2015 Grom
1977 GL1000
User avatar
toayoztan
GTFour God
 
Posts: 6735
Images: 1
Joined: Wed Aug 11, 2004 5:51 am
Location: Oklahoma

1993 Toyota Celica
Top

Re: project alltracst185 10/22 more progress :D

Postby alltracst185 » Fri Nov 04, 2011 8:11 pm

It's deff a good radiator from the looks of it, especially for the price :D Your project is coming along nice :)
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA
Top

Re: project alltracst185 10/22 more progress :D

Postby alltracst185 » Sun Nov 20, 2011 6:04 pm

New wheels! :D 17x9 CCW Classics, no spacers needed for the rear :smokes:

Image
Image
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA
Top

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby CMS-GT4 » Sun Nov 20, 2011 8:46 pm

Sweet you got pats wheels? Let's get those bad boys fitted.
Coldiron
92 st185 (205 swap) | 03 350Z Track (sold) | 13 Pilot | 17 Mazda3
www.noritoy.com | noritoy.deviantart.com | http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=19891
User avatar
CMS-GT4
GTSilver Member
 
Posts: 10451
Images: 7
Joined: Mon Aug 09, 2004 9:12 pm
Location: St Louis Area (IL)

1992 Toyota Celica
Top

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby lumbercis » Sun Nov 20, 2011 10:24 pm

If those are Pat's wheels then they are LM20's. Similar to the Classics but the face is a slightly different design.
Caldina powered...
Image
lumbercis
Gold Member
 
Posts: 2346
Joined: Fri May 13, 2005 4:52 am
Location: Washington, D.C.
Top

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby alltracst185 » Sun Nov 20, 2011 10:38 pm

lumbercis wrote:If those are Pat's wheels then they are LM20's. Similar to the Classics but the face is a slightly different design.

Oh really? I thought they were Classics :lol: Oh well...Yes they are Pats wheels. I have to find some quality tires then i'll fit them. Next purchase is a BBK.
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA
Top

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby Tazka » Mon Nov 21, 2011 10:06 am

Those look sick, 8) what wheels pat is going to roll now?
User avatar
Tazka
Club Member
 
Posts: 757
Joined: Sat Apr 21, 2007 5:09 pm
Location: Finland

1992 Toyota Celica
Top

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby Hotrodhendrix » Mon Nov 21, 2011 8:49 pm

:notworthy: That is all my former twin
"The more you let life's obstacles slow you down the longer it will take to defeat them."
~Yours truly
User avatar
Hotrodhendrix
GTFour God
 
Posts: 3480
Joined: Thu Sep 16, 2004 5:45 pm
Location: DFW Texas
Top

Re: project alltracst185 11/20 new wheels, CCW's :)

Postby alltracst185 » Mon Nov 21, 2011 9:07 pm

Hotrodhendrix wrote::notworthy: That is all my former twin

:lol: :rofl: Now I just need to find someone in my area that can bead roll my intercooler pipes! :bangshead:
st185- HKS exhaust, Aussie mid pipe and custom 3" down pipe, Tial 50mm BOV, HKS 272 cams, HKS adj cam gears, custom FMIC, HKS GT3040, Tial 38mm wastegate, AEM ems, fully built bottom end, RC 1200cc injectors, at 25 lbs and almost complete :D
User avatar
alltracst185
Established Member
 
Posts: 2994
Joined: Sun Jan 14, 2007 8:27 pm
Location: Fitchburg, MA
Top
PreviousNext
Post a reply

Return to My Project

Who is online

Users browsing this forum: No registered users and 2 guests

Switch to mobile style