Switch to full style
Talk about your project car here
Post a reply

Re: St185 full rebuild

Fri Mar 15, 2019 7:32 pm

Doors and tailgate painted next
Members don't see the above ad. Register now
Attachments
Doors painted.jpeg

Re: St185 full rebuild

Fri Mar 15, 2019 7:33 pm

Putting things back together with rusty nuts and bolts looked terrible , so I put them in a basket and sandblasted and painted them as well
Attachments
Bolts painted.jpeg

Re: St185 full rebuild

Fri Mar 15, 2019 7:36 pm

Now I had all these parts painted and perfect I was worried they would get damaged . At this point also expensive parts were going to start going on and I needed a secure room for the car. Next step was enclose the area where I had originally stripped the car.
Attachments
Brake lines going on 2.jpeg
Brake lines going on 1.jpeg
Room built.jpeg

Re: St185 full rebuild

Fri Mar 15, 2019 7:36 pm

brake lines cont....
Attachments
Brake lines going on 3.jpeg

Re: St185 full rebuild

Fri Mar 15, 2019 7:45 pm

The heat was killing me !! In the summer here the temp can reach 34 degrees C.
I had to install an A/C in my new Celica room to continue the assemble of the shell. I decided to epoxy the floors the same time so I wasn't crawling around on dusty concrete.
Attachments
Shell assemble 3.jpeg
Shell assemble 2.jpeg
Shell assemble 1.jpeg

Re: St185 full rebuild

Fri Mar 15, 2019 7:45 pm

Shell assemble cont..
Attachments
Shell assemble 4.jpeg

Re: St185 full rebuild

Fri Mar 15, 2019 7:56 pm

I managed to find polyurethane bushings coming out of Poland on Ebay. Bought a set for the front and rear
Attachments
Polyurethane bushings installed 3.jpeg
Polyurethane bushings installed.jpeg
Polyurethane bushings.jpeg

Re: St185 full rebuild

Fri Mar 15, 2019 7:58 pm

Poly bushings
Attachments
Polyurethane bushings 4.jpeg

Re: St185 full rebuild

Fri Mar 15, 2019 8:07 pm

Tailgate on with new gas struts.
Drilled and slotted rotors and coilovers installed .
Attachments
Coilovers installed 2.jpeg
Coilovers installed 1.jpeg
Tailgate installed.jpeg

Re: St185 full rebuild

Fri Mar 15, 2019 10:48 pm

Incredible work! Following your progress. :notworthy:

Re: St185 full rebuild

Fri Mar 15, 2019 10:52 pm

Thanks man glad you like it !

Re: St185 full rebuild

Sat Mar 16, 2019 5:47 am

Wow this is proper rebuild. Why did you choose to go with polyurethan bushings? Are you going to track the car or is rubber bushings no longer avaible?

You did some great work with the chassi and body

Skickat från min SM-G950F via Tapatalk

Re: St185 full rebuild

Sat Mar 16, 2019 7:08 am

I went with the polyurethane bushings because the rubber ones were rotten or compressed and are not available as replacement parts either. Toyota expected you to change the actual part as the rubber is bonded into the part . So I used a torch to burn out the old rubber bushings prior to sandblasting and painting and then pressed in the new polyurethane ones .
The heat here also destroys rubber a lot faster than in colder climates .

Re: St185 full rebuild

Sat Mar 16, 2019 7:15 am

Sorry forgot to answer your question regarding if it will be a track car. No way ! Lol not after all that sweat, blood and cut knuckles. Especially after searching for parts from all over the globe and countless web sites. It showed me that these cars are becoming less and less available. So I want the car to look and do the part but it’s going to be my weekend baby car. I always wanted a car for myself that I could baby and polish. I’ve built a lot of cars/ vehicles for other people and had nothing nice for myself .

Re: St185 full rebuild

Sat Mar 16, 2019 7:55 am

I wanted to do something different with the car rather than just a stock rebuild. I'm going to make it a wide body version. Currently it is the Carlos Sainz factory version wide body, but I wanted something EXTRA wide, similar to the Rocket Bunny kits. So I ordered some 18" wheels that are 12" wide .
Attachments
Wheels installed on rear 2.jpeg
Wheels installed on rear 1.jpeg
18 inch wheels by 12 inches wide.jpeg
Post a reply