W2A intake temp.

Q&A regarding engines, turbos, and intercoolers and power upgrades

W2A intake temp.

Postby Amate.GT4 » Tue Sep 24, 2019 6:09 am

Hi mates!
I'm install the Ecumaster Ecu and use the GM IAT sensor on 5th injector and trying the car, the temp on intake is of 40/50°C and up 60°C on stop.
What temp. have in your cars on intake? (Remember, my engine is 3sgte gen2, not swap)

Thanks and have a nice day!
Members don't see the above ad. Register now - it's free!
Amate.GT4
Newbie
 
Posts: 10
Joined: Wed Sep 19, 2018 11:34 am
Location: Barcelona, Spain

Re: W2A intake temp.

Postby Gert » Tue Sep 24, 2019 7:16 am

About 30 - 40°C under 1,0 bar boost with top mount intercooler and ERL waterinjection.
Never paid attention to temps when stop, so dunno.
Gert
Club Member
 
Posts: 47
Joined: Tue Sep 29, 2015 8:53 am

Re: W2A intake temp.

Postby Amate.GT4 » Tue Sep 24, 2019 8:32 am

No bad, i'm use watercooler and full throttle pass of 28°C to 44°C in 15sec....
Amate.GT4
Newbie
 
Posts: 10
Joined: Wed Sep 19, 2018 11:34 am
Location: Barcelona, Spain

Re: W2A intake temp.

Postby CMS-GT4 » Tue Sep 24, 2019 2:06 pm

Information on your full setup will be helpful.
I have a 3rd gen engine with a 205 wta IC, aftermarket heat exchanger and ford racing IC pump running all the time. I have a very primitive sensor setup that was in the intake manifold.

I think my max was 119 degrees F or 48.3C. That was under multiple hard boost conditions and stopping. I usually had about 115F after a lot of boost runs while moving. This test was done on a 95F/35C day.
Coldiron
92 st185 (205 swap) | 03 350Z Track (sold) | 13 Pilot | 17 Mazda3
www.noritoy.com | noritoy.deviantart.com | http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=19891
User avatar
CMS-GT4
GTSilver Member
 
Posts: 10464
Images: 7
Joined: Mon Aug 09, 2004 9:12 pm
Location: St Louis Area (IL)

1992 Toyota Celica

Re: W2A intake temp.

Postby Amate.GT4 » Tue Sep 24, 2019 2:19 pm

Have a ST185 watercooler with a Bosch water pump and CXRacing radiator.
Except the turbo, is a Fensport Stage 2, and injectors of ST205, all engine is stock.
Amate.GT4
Newbie
 
Posts: 10
Joined: Wed Sep 19, 2018 11:34 am
Location: Barcelona, Spain

Re: W2A intake temp.

Postby Amate.GT4 » Tue Sep 24, 2019 2:24 pm

The day of probe, the ambient temperature is of 26°C, much humity.
Never pass of 2500rpm to highway, pass in 3th velocity at 1000rpm to 6500rpm full throttle 100% for log information to have information for melody on the Ecumaster.
Amate.GT4
Newbie
 
Posts: 10
Joined: Wed Sep 19, 2018 11:34 am
Location: Barcelona, Spain

Re: W2A intake temp.

Postby Gert » Tue Sep 24, 2019 5:09 pm

Gert wrote:About 30 - 40°C under 1,0 bar boost with top mount intercooler and ERL waterinjection.
Never paid attention to temps when stop, so dunno.

Outside temps here about 15 - 20°C
Gert
Club Member
 
Posts: 47
Joined: Tue Sep 29, 2015 8:53 am

Re: W2A intake temp.

Postby Amate.GT4 » Wed Sep 25, 2019 5:55 pm

Today try the news little upgrades, the IAT with nylon separator and change water of watercooler with 90% glycol 10% water and no pass of 45/50°C full trhottle, 25°C external temp.
Amate.GT4
Newbie
 
Posts: 10
Joined: Wed Sep 19, 2018 11:34 am
Location: Barcelona, Spain


Return to Performance and Power

Who is online

Users browsing this forum: No registered users and 1 guest