Q&A regarding engines, turbos, and intercoolers and power upgrades
Wed Feb 01, 2012 8:21 pm
I have worked out a little better price through my shop (Autofab Race Cars) and Moroso if I can get together 10 sales on the Moroso 20935 oil pan. It is just one of those items that there isn't a lot of markup on due to a few retailers selling them so cheap but I got my shop to reduce their markup as well as Moroso to give us a little extra off for this offer. There is a chance I might be able to Moroso to give an additional 5% off if we get well over 10 sold but that is by no means a guarantee, just something I would try for if that ended up being the situation so don't count on that. Moroso doesn't typically keep this pan on the shelf but they said once the minimum of 10 were ordered, they would start production on them and should be completed within a month depending on how busy they are at the time the order comes through. If there is no interest, no big deal, I just have quite a few connections in the racing world being that I am a full time drag racer sponsored by some connected companies and just trying to help out the alltrac world if I can.
$304.99 plus shipping.http://www.moroso.com/catalog/categoryd ... code=11930
Wed Feb 01, 2012 8:23 pm
I just bought one of these about 2 weeks ago! That sucks....
Amazing piece for anyone who's into road racing and doesn't want to grenade their motor because of having no oil pressure.
Wed Feb 01, 2012 8:47 pm
i need a new pan ill take 1
Wed Feb 01, 2012 8:53 pm
Damn that's to good of a price,must have kissed some real ass
Wed Feb 01, 2012 8:55 pm
I'm assuming these are for gen 2 only?
Wed Feb 01, 2012 9:08 pm
I can get a lot of stuff for wholesale pricing or better with lots of manufacturers but the thing is not too many of them make stuff that apply to the Alltrac world. Most of it is specific to the drag racing world. But there are some things that apply. I can get just about anything fabricated if there is the demand. Stuff like AN fittings and braided line I can get cheap. Some things there are more markup on than others. Some deals I can only get for my personal use like the new GT3582R Ball bearing turbo I just bought for $800 delivered. Stuff that isn't for my personal use I will get the best deal I can for you guys but there will still be at least minimal markup on the stuff because they can't stay in business giving everybody stuff for cost. And for the record I am not making any money on anything, just trying to help out where I can. All payment would be handled directly through Autofab Race Cars.
Wed Feb 01, 2012 9:10 pm
aus jd 2703 wrote:I'm assuming these are for gen 2 only?
I assume so since the site lists 1990-1995 3SGTE. I didn't realize there was a difference?
Wed Feb 01, 2012 9:48 pm
do these clear the ACE crossbrace?
Wed Feb 01, 2012 10:51 pm
underscore wrote:do these clear the ACE crossbrace?
Don't know but they give the measurements on the pan on the site so you should be able to do some measuring to find out.
Thu Feb 02, 2012 3:39 am
I don't believe it clears the Cusco cross brace (Ace is similar design)?
I also believe these should clear the ARP main sutds on the rear main seal side. I modified my oil pan already and got the -AN fitting to bolt into the stock oil pan. This seems enticing though. I'll have to thin about this.
Thu Feb 02, 2012 4:06 am
I'm in. I'll ditch my cross brace for oil pressure in hard turns
Thu Feb 02, 2012 6:45 am
im in i want 1!
Thu Feb 02, 2012 7:28 pm
Next questions, these pans are made for the MR2 which uses an oil level sensor. Will these come with a block off plate? I have made a block off plate in the past but will add to the expense
Thu Feb 02, 2012 7:53 pm
They do not come with a block off plate. As Klue already knows, I had to order one from Two's R Us.
Thu Feb 02, 2012 8:19 pm
k.beaty wrote:They do not come with a block off plate. As Klue already knows, I had to order one from Two's R Us.
I know that about the pan hoping that the OP will chime in about this
© 2018 AllTrac.net
phpBB Mobile / SEO by Artodia.