Mon Nov 26, 2018 6:09 pm
Tue Nov 27, 2018 5:21 am
transneptunian69 wrote:Exhaust: downpipe and full 3" exhaust. I hear that the manifold wont make much of a difference with the stock turbo but ive considered one and I do love the look of tubular manifolds.
transneptunian69 wrote:Straight intake: what brands do you guys recommend? I know it has that annoying bulky MAF sensor in the way which limits what you can do without custom parts, is there a way to bypass this thing or a aftermarket replacement that is smaller?
transneptunian69 wrote:Ive also considered a FMIC, though I don't like the look of all the pipes running everywhere and my understanding is that TMIC has better throttle response and less turbo lag but is limited in overall power.
transneptunian69 wrote:That's really all I have planned right now, any other mods that would be effective for my goal?
Tue Nov 27, 2018 12:05 pm
Tue Nov 27, 2018 2:33 pm
transneptunian69 wrote:Thanks for the reply. I have glanced through your build thread, very impressive btw. As for the exhaust, you just added a little restriction back into the muffler and it fixed the back pressure issue? How much was the upgraded actuator? Seems many people just stick with the cast manifold, so I’ll probably just do that.
transneptunian69 wrote:For the intake, I did notice you’re using the k and n drop in. I see many are using a mostly stock air box setup, so I guess there’s not much advantage to going with the cone filter? I would prefer some sleek aluminum piping over the stock rubber hosing but that would have to be custom fitted without getting a standalone to bypass the afm right? Every kit I’ve found seems to simply fit a cone onto the AFM.
transneptunian69 wrote:The ct27 seems to be a good bolt on option for me, I’ll decinitely have to look into that. As far as the standalone, I’d like to go that route eventually. What are you using and how involved is the installation? Is it plug and play or will I be splicing wires for days lol? Also, at what point would I have to start upgrading the fuel system?
Tue Nov 27, 2018 3:32 pm
Tue Nov 27, 2018 5:09 pm
transneptunian69 wrote:Where did you find the silicon replacements for the intake hoses?
transneptunian69 wrote:What exhaust system are you using? I planned on getting the dp from BRD but wasn’t sure if I wanted to buy a kit or have someone local custom make one for me.
Tue Nov 27, 2018 5:49 pm
Wed Nov 28, 2018 3:53 am
transneptunian69 wrote:I’ve found silicon piping for the 185 rc, but nothing for regular 185s. Not sure if they are the same or not.
Wed Nov 28, 2018 11:16 am
Thu Nov 29, 2018 12:57 pm
Thu Nov 29, 2018 2:20 pm
© 2018 AllTrac.net
phpBB Mobile / SEO by Artodia.