Page 1 of 1

St185 CV axles????

PostPosted: Thu Oct 23, 2014 3:53 pm
by peteleetzor
So im in the process of replacment the axle, hubs, and bearing. I came accorss an issue and Im not sure which one to use for the axle. I did a quick search on Oriley and this came up. The only difference between the 5031 and 5085 is that the lenght for the 5031 is 4 inch shorter then the 5085. Any idea which one I need?

The first item is the Part # : 60-5031
http://www.oreillyauto.com/site/c/detai ... &ppt=C0362

Second item was Part Number: 60-5085
http://www.oreillyauto.com/site/c/detai ... &ppt=C0362

Re: St185 CV axles????

PostPosted: Thu Oct 23, 2014 7:32 pm
by yyonline
60-5031 is a ST185 axle.

Re: St185 CV axles????

PostPosted: Wed Nov 05, 2014 7:16 pm
by peteleetzor
oriley ended up giving me this
http://www.yoyopart.com/oem/13260438/su ... pplication

it says is for the 88-89 alltrac.

Will this work? or did they mess up. My car does have abs.

Re: St185 CV axles????

PostPosted: Thu Nov 06, 2014 4:31 am
by yyonline
Rockauto lists TO-8030 as an 88-91 Camry axle. Which according to this thread, should work. If in doubt, measure the length and compare it to the old one.

Re: St185 CV axles????

PostPosted: Thu Nov 06, 2014 7:22 am
by ST_6396
That axle should work, but it won't have the tone ring for the wheel speed sensor so your ABS wouldn't work.

Re: St185 CV axles????

PostPosted: Thu Nov 06, 2014 7:44 am
by yyonline
According to the specs, TO-8030 has the 48-tooth ABS tone wheel, which should work for ST185.

Re: St185 CV axles????

PostPosted: Thu Nov 06, 2014 9:42 am
by FC Zach
The O'Reilly part #: 60-5031 will work for you and it comes with the ABS ring. I replaced both sides on my car with this part #.