93celicaconv
Member
Just came to realize the driver side rear wheel is free to move after the parking brake is pulled. Passenger side brakes properly. This tells me the lever cable and the passenger side cable and drum brake shoes are working properly.
Before I start to open up the rear driver side brake assembly, is there a common type of problem that would cause this (i.e.; driver side parking brake cable rusted tight / inner brake shoe mechanism rusted tight / other)? It had been sitting for a long time before being restored, but I did not mess with the rear brakes at all as the disc were of the proper thickness and there was plenty of pad material left - never took all apart to look at the parking brake setup.
Before I start to open up the rear driver side brake assembly, is there a common type of problem that would cause this (i.e.; driver side parking brake cable rusted tight / inner brake shoe mechanism rusted tight / other)? It had been sitting for a long time before being restored, but I did not mess with the rear brakes at all as the disc were of the proper thickness and there was plenty of pad material left - never took all apart to look at the parking brake setup.