rc/cs ecu

Gary ST165

New member
short answer: no.

compare the ecu pin outs: do a search!!!


open up a 1990 ecu and note it has single circuit board.

the 1991 onwards ecu's (late spec 185's & RC/CS etc) have 2 printed circuits boards including an external charge cooler control module. they are not interchangeable with your 1990 ecu unless you re-pin/ rewire !
The CS / RC also needs the matching larger sized AFM...
 

RafaCalde

New member
alltracst185":1i7atq9c said:
so a rc\cs ecu will be plug and play with my 1990 trac?

the pinouts are different but are not hard to change out just look at the 90 pins and change them to look like the 92 pinouts. it took me about an hour. you don't need to cut anything at all.
 
Top