krazybyzzle":3uttcf2r said:
88st165":3uttcf2r said:
this is the one i used....
http://cgi.ebay.com/ebaymotors/NEW-Liqu ... dZViewItem
i thought the brackets would be how they were pictured in the ad but they were not, which was no big deal to me. but you have to lose the fogs and brackets. the dim are 24x7x3 and its pretty good quality there are also pics on mr2oc b/c some of those guys are using it as well.
You wouldnt happen to have a tutorial on how to install it now would you? planning on getting the same one...
no i didnt document the install when i did it.... that was the only pic i had. i could however take pics of how it is mounted with the brackets and you can get a really good idea of how it is done.
-all i did was i had to cut off the fog light brakets
-grind down the welds
-i made the brackets out of 1/8" thick aluminum sheets i had laying around (bent them by hand to a shape similar to an S, alum is nice b/c its soft enough to work with but still plenty strong and it doesnt rust... i still want to flat black it though)
-measure and centered everything how i wanted, marked and drilled the mounting holes on the brackets
-2 bolt holes to the intercooler, 2 to bolt to the bumper support (its tricky to bolt it to the bumper support because you have to go through one of the holes which is only like 2" big and insert the bolt and hold it while you tighten the nut down)
ill try to have those pics in a few days.