IStalkgt4s
New member
I have a 90 st185 and I'm getting ready for the big build, I'm shooting for 500-600 hp, but I wanna stay top mount if possible, I have the rc WTA and was told they can support up to about 550hp...
(The parts I have already.)
Eagle h beam rods
hks valve springs
supertech +1mm valves
aem water/meth injection
fidanza lw flywheel arp bolts
Aussie DP
hks silent power exhuast
(Parts I don't have that I'm working on)
pistons
850cc Injectors
Fuel rail
Valve guides
Cam gears
272 or 280 Cams
Tuning belt
hks Fuel cut defender
hks Speed defender
Aem ecu
Radiator
Fuel cell
hoses
low temp Thermostat
Fuel pressure regulator
255 Fuel pump
Pulleys
external Waste gate
Exhaust manifold
Engine mounts
Clutch
Upgraded turbo.
Intake manifold
Throttle body
I know it's a big list... And that's just for the engine, my question to everyone is with the parts I don't have, what's my best option for accomplising my goal, etc. turbo, cam set up, exhaust and intake manifolds,throttle body,fuel rail, you get the idea. And for the rest of the stuff such as engine mounts, where could I find some good after market ones? And for a good replacemnt radiator, any brands? Or specs I should go with? I'm kinda over my head with trying to build this engine, never built a Toyota engine, only Honda, and that's like a belly button, everyone has one so it's not very hard, but I want a beast that will feast on the weak. So any help is greatly appricated. :shoots:
(The parts I have already.)
Eagle h beam rods
hks valve springs
supertech +1mm valves
aem water/meth injection
fidanza lw flywheel arp bolts
Aussie DP
hks silent power exhuast
(Parts I don't have that I'm working on)
pistons
850cc Injectors
Fuel rail
Valve guides
Cam gears
272 or 280 Cams
Tuning belt
hks Fuel cut defender
hks Speed defender
Aem ecu
Radiator
Fuel cell
hoses
low temp Thermostat
Fuel pressure regulator
255 Fuel pump
Pulleys
external Waste gate
Exhaust manifold
Engine mounts
Clutch
Upgraded turbo.
Intake manifold
Throttle body
I know it's a big list... And that's just for the engine, my question to everyone is with the parts I don't have, what's my best option for accomplising my goal, etc. turbo, cam set up, exhaust and intake manifolds,throttle body,fuel rail, you get the idea. And for the rest of the stuff such as engine mounts, where could I find some good after market ones? And for a good replacemnt radiator, any brands? Or specs I should go with? I'm kinda over my head with trying to build this engine, never built a Toyota engine, only Honda, and that's like a belly button, everyone has one so it's not very hard, but I want a beast that will feast on the weak. So any help is greatly appricated. :shoots: