Hey guys,
Today I drove north 3 hours to Edmonton for a Sport Compact Challenge event. There were a lot of very quick cars there...I'd say at least 80% of them were turbo'd...strangely there were a good 15 RHD cars there too...it was crazy. Lots of Silvia's, Skylines, an MK3 Supra GT twin turbo, an old Toyota Soarer...and more. Pretty cool. I guess it's easier to do just buy a silvia than do the SR20 swap...lol.
So anyways at the drag event I did very well I think. I was well into the top 24 car cutoff to move on to eliminations although I did not take part. You needed a 14.2 to make it.
My best time was a 13.627 @ 98.79mph. My best MPH of the day was 101.03 (13.979...messed the launch). My next fastest run was 13.656 @ 100.93. This is all at 2200ft above sea level too.
I'm pretty happy with that, considering I'm on the stock injectors still, and the factory ECU. Although I do have a J&S Safeguard, which I can't rave enough about. It truly rocks. I just got the gauge installed and now have it tuned pretty well. Setting it on individual cylinder retard mode absolutely rocks. It feels stronger with timing being adjusted on the fly automatically, on a per cylinder basis. What can I say. If you are modding the car, you need one!
Here are the numbers on the 3 most interesting slips. The left lane 60' timer wasn't working. Grr. And it was set so that a 0.000 was a perfect reaction time.
R/T: 0.419
60': -
330: 5.568
1/8: 8.671
MPH: 79.14
1000: 11.363
1/4: 13.627
MPH: 98.79
R/T: 0.511
60': 2.137
330: 5.975
1/8: 9.070
MPH: 79.49
1000: 11.739
1/4: 13.979
MPH: 101.03
R/T: 0.742
60': 1.901
330: 5.650
1/8: 8.743
MPH: 79.46
1000: 11.414
1/4: 13.656
MPH: 100.93
Too bad my best time wasn't also over 100mph, but what can ya do. For those who don't know, my mods are: jdm 185 engine/ecu, ct20b at 14psi, adjustable FPR, RC intercooler, ngk bkr7e plugs, walbro fuel pump, TTE mhg, 2.5" passion DP, 3" dp-back exhaust, Bailey BPV, Aquamist water injection using the .5mm jet, clutchmasters stage 3 clutch, fidanza flywheel, intake, catch can, and the J&S ultra safeguard. I dyno'd 236awhp and 252 ft-lbs at 12psi, but I've done a few things since plus increased to 14psi.
Thanks for looking! I might get some pics/video of me racing...I'll see if i can find anything.
Today I drove north 3 hours to Edmonton for a Sport Compact Challenge event. There were a lot of very quick cars there...I'd say at least 80% of them were turbo'd...strangely there were a good 15 RHD cars there too...it was crazy. Lots of Silvia's, Skylines, an MK3 Supra GT twin turbo, an old Toyota Soarer...and more. Pretty cool. I guess it's easier to do just buy a silvia than do the SR20 swap...lol.
So anyways at the drag event I did very well I think. I was well into the top 24 car cutoff to move on to eliminations although I did not take part. You needed a 14.2 to make it.
My best time was a 13.627 @ 98.79mph. My best MPH of the day was 101.03 (13.979...messed the launch). My next fastest run was 13.656 @ 100.93. This is all at 2200ft above sea level too.
I'm pretty happy with that, considering I'm on the stock injectors still, and the factory ECU. Although I do have a J&S Safeguard, which I can't rave enough about. It truly rocks. I just got the gauge installed and now have it tuned pretty well. Setting it on individual cylinder retard mode absolutely rocks. It feels stronger with timing being adjusted on the fly automatically, on a per cylinder basis. What can I say. If you are modding the car, you need one!
Here are the numbers on the 3 most interesting slips. The left lane 60' timer wasn't working. Grr. And it was set so that a 0.000 was a perfect reaction time.
R/T: 0.419
60': -
330: 5.568
1/8: 8.671
MPH: 79.14
1000: 11.363
1/4: 13.627
MPH: 98.79
R/T: 0.511
60': 2.137
330: 5.975
1/8: 9.070
MPH: 79.49
1000: 11.739
1/4: 13.979
MPH: 101.03
R/T: 0.742
60': 1.901
330: 5.650
1/8: 8.743
MPH: 79.46
1000: 11.414
1/4: 13.656
MPH: 100.93
Too bad my best time wasn't also over 100mph, but what can ya do. For those who don't know, my mods are: jdm 185 engine/ecu, ct20b at 14psi, adjustable FPR, RC intercooler, ngk bkr7e plugs, walbro fuel pump, TTE mhg, 2.5" passion DP, 3" dp-back exhaust, Bailey BPV, Aquamist water injection using the .5mm jet, clutchmasters stage 3 clutch, fidanza flywheel, intake, catch can, and the J&S ultra safeguard. I dyno'd 236awhp and 252 ft-lbs at 12psi, but I've done a few things since plus increased to 14psi.
Thanks for looking! I might get some pics/video of me racing...I'll see if i can find anything.