ACPT C/F Driveshaft Group buy is a go!!!

Lets talk clutches and everything drivetrain related

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby Sifu » Tue Nov 09, 2010 5:48 pm

James number is (714)895-5544 #220. Give them a call if you're interested. Because they have the dimensions it shouldn't be too hard for them to make again. I just don't know what they will charge. Also note that it may take a few calls to reach James. They are pretty busy and can be difficult to get a hold of.

As for the Driveshaft Shop I don't know what they will ask for the price. It might be worth asking but don't forget that ACPT has experience in our automobile. I'm sure the driveshaft shop will need a driveshaft and test fit for our vehicle.
Members don't see the above ad. Register now - it's free!
1990 Celica ST185 "The Money Pit"
Image
BROKEN! BUT NOT BEATEN!
2005 Scion tC FW21
1985 AW11
1987 AW11
User avatar
Sifu
GTFour God
 
Posts: 3041
Joined: Thu Aug 19, 2004 6:08 pm
Location: Savage Bowels of MN

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby EricGT4 » Wed Nov 10, 2010 12:10 am

Thanks for the info ill give them a call and see if I can get a hold of one
1992 Alltrac - 350whp - SOLD
User avatar
EricGT4
Club Member
 
Posts: 758
Joined: Sat Nov 06, 2004 6:53 am
Location: NYC

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby codester » Fri Jul 15, 2011 2:26 pm

Hello everyone, I am in a bit of a predicament and I was hoping that someone here would be able to help. I recently contacted ACPT in an attempt to buy a composite drive shaft. They informed me that they no longer had any information on the All-Trac or any history of ever making a drive shaft. So my question is does any one still have the initial drawings from ACPT. Or if someone has it conveniently laying out on a table I think a measurement from u-joint to u-joint and the dia. would be almost as good. This would also help to keep this part available in the future. Thank you in advance for your help.
codester
Club Member
 
Posts: 24
Joined: Fri Jun 15, 2007 6:17 pm
Location: SantaFe NM

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby CMS-GT4 » Wed Jul 27, 2011 1:06 am

Can someone tell me the full length of the cd driveshaft?
Coldiron
92 st185 (205 swap) | 03 350Z Track (sold) | 13 Pilot | 17 Mazda3
www.noritoy.com | noritoy.deviantart.com | http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=19891
User avatar
CMS-GT4
GTSilver Member
 
Posts: 10404
Images: 7
Joined: Mon Aug 09, 2004 9:12 pm
Location: St Louis Area (IL)

1992 Toyota Celica

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby Autobot » Sun Sep 18, 2011 11:21 pm

Has anybody contacted James lately to see if he still produces the driveshaft?
Image

Image
User avatar
Autobot
Established Member
 
Posts: 1810
Joined: Fri Jan 28, 2005 10:53 pm
Location: Manitoba, Canada

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby rallygarage » Fri Sep 23, 2011 7:44 pm

I am new here but any driveshaft shop can do this. I however use a 2 section shaft with center support bearing. That was recomended for rally. I had 2 shafts built for me here in New Jersey.
rallygarage
Club Member
 
Posts: 195
Joined: Thu Aug 25, 2011 11:58 pm

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby Corey » Sat Dec 10, 2011 3:49 pm

I contacted ACPT yesterday and talked to Ryan Clampitt over the phone. They still have the specs on our propshaft and they can still make them for us. He emailed me the blueprint sheet they have.

The price I was quoted is $875 each.

I'll be placing an order for mine in the next week.

Cheers
Image
User avatar
Corey
GTFour God
 
Posts: 4152
Images: 50
Joined: Sun Feb 11, 2007 12:12 am

1989 Toyota Celica

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby underscore » Sat Dec 10, 2011 10:19 pm

you can't have a 3" exhaust and this shaft at the same time can you?
★ 1991 GTFour RC ~ "Rebel Scum" ★
It's for sale! http://www.alltrac.net/phpBB2/viewtopic.php?f=64&t=52181
Build thread http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=44216
underscore
GTFour God
 
Posts: 3977
Images: 0
Joined: Mon Apr 09, 2007 11:29 pm
Location: Kelowna, BC

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby toayoztan » Sun Dec 11, 2011 7:27 am

As far as I was aware, you can, it's just very very minimal clearance between the two...and depending on which 3" exhaust you have (pretty much aussie, motoria, or custom mp).

Bryan
2017 Pilot Elite
2014 Juke NISMO RS
1994 Supra TT 6spd
1993 Alltrac - http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=37466
1977 Celica GT Liftback
2015 Grom
1977 GL1000
User avatar
toayoztan
GTFour God
 
Posts: 6735
Images: 1
Joined: Wed Aug 11, 2004 5:51 am
Location: Oklahoma

1993 Toyota Celica

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby underscore » Sun Dec 11, 2011 7:49 pm

all custom, so it can be made to move if needed. hmm...
★ 1991 GTFour RC ~ "Rebel Scum" ★
It's for sale! http://www.alltrac.net/phpBB2/viewtopic.php?f=64&t=52181
Build thread http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=44216
underscore
GTFour God
 
Posts: 3977
Images: 0
Joined: Mon Apr 09, 2007 11:29 pm
Location: Kelowna, BC

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby ALLensTRAC » Mon Dec 12, 2011 8:22 pm

Hey Corey did they by chance give you a quote on what shipping would be. I'm sure shipping would be more for you due to the border but just want to get an idea because I would love to pick this up.
Thanks,
Allen
Allen

1992 Toyota Celica Alltrac "Never ending Project"
2014 Lexus CT200h Redline/Black "Daily project"
2006 Toyota Highlander Wifes daily
User avatar
ALLensTRAC
Club Member
 
Posts: 556
Joined: Thu Dec 23, 2010 11:33 pm
Location: Sarasota,FL

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby Corey » Mon Dec 12, 2011 11:53 pm

Hi Allen,

Not sure on shipping costs but I hope they don't ship via UPS.

Corey
Image
User avatar
Corey
GTFour God
 
Posts: 4152
Images: 50
Joined: Sun Feb 11, 2007 12:12 am

1989 Toyota Celica

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby scuba » Thu Dec 15, 2011 3:37 am

I wonder if we can get another group buy going? Or does anyone know a place in the pa/md/dc/va area that can fix/repair my drive shaft? My carrier bearing and u-joints are on their way out!
scuba
Club Member
 
Posts: 93
Joined: Wed Dec 01, 2010 4:38 am
Location: Baltimore, MD

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby Meurz » Thu Dec 15, 2011 9:09 pm

Fml :( The price Corey got is already better than we paid during the group buy! :wink:
Turbocelica.nl
User avatar
Meurz
Established Member
 
Posts: 2189
Joined: Sat Sep 10, 2005 12:16 pm
Location: NLD

Re: ACPT C/F Driveshaft Group buy is a go!!!

Postby toayoztan » Fri Dec 16, 2011 12:03 am

Wow, yeah 875 is a good deal.

I may have to jump on this now too...

Bryan
2017 Pilot Elite
2014 Juke NISMO RS
1994 Supra TT 6spd
1993 Alltrac - http://www.alltrac.net/phpBB2/viewtopic.php?f=44&t=37466
1977 Celica GT Liftback
2015 Grom
1977 GL1000
User avatar
toayoztan
GTFour God
 
Posts: 6735
Images: 1
Joined: Wed Aug 11, 2004 5:51 am
Location: Oklahoma

1993 Toyota Celica

PreviousNext

Return to Drivetrain Central

Who is online

Users browsing this forum: No registered users and 0 guests

cron