turbocelica
New member
So since I don't have evap or ac I can get rid / cap off all of them?
That would work!turbocelica":1fe28jpd said:So since I don't have evap or ac I can get rid / cap off all of them?
CMS-GT4":m3x0gsk3 said:I found my code 23 issue. I have a harness extension at the ecu that I can use to tap my emange into.
I found that I had a wire in the wrong place. Resolved the issue though. Moved the wire, code 23 is gone.
Now I have a code 31. and my vac is low as well. ~15hg.
Code 31 is an open or short in vac sensor.
Good lord, what could that mean now.
Yeah, MAP sensor. Check the wiring and the hoses to the sensor.turbocelica":31abjn1q said:so the map sensor? or am i thinking of something else
Body harness (under dash, etc.) and fuse box plugs are totally different on the ST205 vs. ST185. It is a lot more than just lengthening that you would have to do. You should probably plan on using your ST185 harness and modifying it to work with the ST205 motor and ECU.quieter":kpedtoer said:if i was to use the st205 harness (jdm st205 swap) in my LHD st185, would i need to buy a harness extension or extend it myself?
What are you having trouble with specifically? I was able to use the stock Camry throttle cable with very minor modifications on my ST205 motor. I don't think anybody has had a problem re-using their stock throttle cable yet when doing ST185->ST205.monkracing29":2x4tiwny said:Alright here's a question for you guys I am trying to figure out which throttle cable to use I looked through the thread and I didn't see anything about it am I blind :shrug: or is there nothing about it on there the 185 throttle cable just doesn't fit on the 205 throttle body. Is there a way to get it on there correctly?