You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
ST165 driveshaft support bearings
- Thread starter JohnNK
- Start date
fussellbug
New member
the front and rear support bearings are identical part numbers but the part number changed during the 1988 model year
1987/10-1988/04 BEARING ASSY, CENTER SUPPORT, NO. 1 37230-20110 (subs. 37230-20101)
1988/04-1989/08 BEARING ASSY, CENTER SUPPORT, NO. 1 37230-20120 (subs. 37230-20121)
The early model part number is discontinued but the 37230-20121 shows as still available on ToyotaPartsZone.com for $135.89. I don't normally buy through them, but it provides me a preliminary indication of dealer parts availability.
1987/10-1988/04 BEARING ASSY, CENTER SUPPORT, NO. 1 37230-20110 (subs. 37230-20101)
1988/04-1989/08 BEARING ASSY, CENTER SUPPORT, NO. 1 37230-20120 (subs. 37230-20121)
The early model part number is discontinued but the 37230-20121 shows as still available on ToyotaPartsZone.com for $135.89. I don't normally buy through them, but it provides me a preliminary indication of dealer parts availability.
alltracman78
Active member
It's cheaper to get a 1 piece steel shaft made.
But you will lose the dampening effect of the stock shafts.
But you will lose the dampening effect of the stock shafts.
brutekiller787
New member
Threadjack: where can you get one made and exactly how cheap is it?
alltracman78
Active member
Your local driveshaft shop can make them, if you have to ship it the price goes up a bit.
Cost me $200 for my Cressida, that's with new U joints. I also live in an expensive area [near Boston].
Cost me $200 for my Cressida, that's with new U joints. I also live in an expensive area [near Boston].