underscore":fhh2ir23 said:
Do a search on here for the camshaft life line, it should have the info you need.
Underscore good advice as always. I read it before but was still unsure if I needed to change anything else for the intake cam to work, as I don't see a definitive answer about a 2gen 3s-gte running 3gen cams. Seems like everyone is talking about 3sge cams which I'm not interested in since I have a set of 3gen 3s-gte cams I can get for cheap at the moment.
MrDB":fhh2ir23 said:
Its a bolt in upgrade, Just need to re shim the valves. ( No need for shim under bucket )
I run this in mine, noticable gains.
Thank you MrDB, so from what the camshaft life line shows only the intake came is worth swapping as the exh shows the same duration. did you run just the intake cam? Also, are you running the stock fuel system? I don't plan on upgrading the fuel system until I build a more powerful engine next year. I have it all apart at the machine shop, just need to know what to tell them to do when then put everything back together. Thanks for your help. :notworthy: :notworthy: