Celica All trac experts. I need some help on some elctrical and vacuum issues I need to work out for my Corolla ST205 3s-gte build.
Here's a quick current state of the project.
A. Where is this supposed to go?
Ans: Stock BOV
B.(little hose)/C.(big hose) These lines, where should they end up?
Ans: C.Catch can.
D.(upper)/E.(lower) One of these maybe connects to C.?
Ans: A/C Idle up.
F. What is this blue connector for?
G.(small white)/H.(big white)/J.(grey)/K.(black) Does anyone know where these body connectors go or what the pin-outs are?
G.) IN1-white 8 pin - A/C
H.) II1-white 19 pin - boost/speed/ABS/engine oil
J.) II2-Grey 13 pin - still need pins 1 and 8 -
K.) IJ1-Dark grey 17 pin - still need pin 2 - ABS/Fuel pump/etc
Same G./H./J./K. as above
L.(small hose from charge cooler) Does anyone have a PCV catch can for sale?
M.(Left small hose)/N.(right small hose)/P.(larger hose) I'm guessing M or N connect to charcoal canister and P to one of D/E? But i have no idea.
Here's L. again on the right.
Q. Is this to the brake booster? It's the same location as the corolla brake booster vacuum line.
Ans: Brake Booster
R. everything coming out of the junction block. headlights and things? some probably go back to the kick panel block under the fender? I'd like to splice the harnesses here, partially.
Part of R. cut harnesses is connector EA1 - white 17 pin - holds power circuit to body and a bunch more misc.
This is a disassembled 1989 corolla all-trac 4AFE harness. I'm working on splicing everything toether so I don't have to go standalone... buuut, maybe I should. whatever, this is a starting point. I'd love to figure it out so I can put together a how-to for people that also want to do it.
Also, here's my build on the wagon forum.
http://www.alltracwagon.net/forum/v-pos ... 77/post-1/
Here's a quick current state of the project.
A. Where is this supposed to go?
Ans: Stock BOV
B.(little hose)/C.(big hose) These lines, where should they end up?
Ans: C.Catch can.
D.(upper)/E.(lower) One of these maybe connects to C.?
Ans: A/C Idle up.
F. What is this blue connector for?
G.(small white)/H.(big white)/J.(grey)/K.(black) Does anyone know where these body connectors go or what the pin-outs are?
G.) IN1-white 8 pin - A/C
H.) II1-white 19 pin - boost/speed/ABS/engine oil
J.) II2-Grey 13 pin - still need pins 1 and 8 -
K.) IJ1-Dark grey 17 pin - still need pin 2 - ABS/Fuel pump/etc
Same G./H./J./K. as above
L.(small hose from charge cooler) Does anyone have a PCV catch can for sale?
M.(Left small hose)/N.(right small hose)/P.(larger hose) I'm guessing M or N connect to charcoal canister and P to one of D/E? But i have no idea.
Here's L. again on the right.
Q. Is this to the brake booster? It's the same location as the corolla brake booster vacuum line.
Ans: Brake Booster
R. everything coming out of the junction block. headlights and things? some probably go back to the kick panel block under the fender? I'd like to splice the harnesses here, partially.
Part of R. cut harnesses is connector EA1 - white 17 pin - holds power circuit to body and a bunch more misc.
This is a disassembled 1989 corolla all-trac 4AFE harness. I'm working on splicing everything toether so I don't have to go standalone... buuut, maybe I should. whatever, this is a starting point. I'd love to figure it out so I can put together a how-to for people that also want to do it.
Also, here's my build on the wagon forum.
http://www.alltracwagon.net/forum/v-pos ... 77/post-1/